| PARTS |
| 1000 |
Non-Stick Bowl Gasket Set |
$12.00 |
| 1002 |
Standard Bowl Gasket Set |
$7.00 |
| 1003 |
350 Race Rebuild Kit Gas |
$35.00 |
| 1004 |
500 Race Rebuild Kit Gas |
$35.00 |
| 1005 |
390 Race Rebuild Kit Gas |
$55.00 |
| 1006 |
650-750 Race Rebuild Kit Gas |
$55.00 |
| 1007 |
950-1000 Race Rebuild Kit Gas |
$55.00 |
| 1008 |
1050-1250 Race Rebuild Kit Gas |
$55.00 |
| 1009 |
500 Alcohol Rebuild Kit |
$50.00 |
| 1010 |
650-750 Alcohol Rebuild Kit |
$85.00 |
| 1011 |
950-1000 Alcohol Rebuild Kit |
$85.00 |
| 1012 |
1050-1250 Alcohol Rebuild Kit |
$85.00 |
| 1015-50-100 |
Gas Jet Set |
$5.00 |
| 1020-128-180 |
Alcohol Jet each ¼ x 32 |
$5.00 |
| 1025-128-260 |
Alcohol Jet each 10mm Short |
$4.50 |
| 1028-128-260 |
Alcohol Jet each 10mm Large |
$5.00 |
| 1030 |
30cc Diaphragm |
$3.50 |
| 1032 |
50cc Diaphragm |
$12.00 |
| 1034 |
Vacuum Secondary Diaphragm |
$10.00 |
| 1035 |
3.5 Standard Power Valve |
$8.00 |
| 1045 |
4.5 Standard Power Valve |
$8.00 |
| 1050 |
5.0 Standard Power Valve |
$8.00 |
| 1065 |
6.5 Standard Power Valve |
$8.00 |
| 1165 |
6.5 High Flow Power Valve |
$12.00 |
| 1205 |
Spring Loaded Needle & Seat |
$18.50 |
| 1210 |
.110 Needle & Seat Viton |
$10.00 |
| 1215 |
.110 Bottom Feed Needle & Seat |
$19.95 |
| 1220 |
.120 Needle & Seat Viton |
$12.00 |
| 1225 |
.120 Bottom Feed Needle & Seat |
$19.95 |
| 1230 |
.120 Stainless Steel Needle & Seat |
$15.00 |
| 1250 |
.150 Titanium Needle & Seat |
$19.95 |
| 1321 |
Discharge Nozzle 21 |
$7.50 |
| 1325 |
Discharge Nozzle 25 |
$7.50 |
| 1328 |
Discharge Nozzle 28 |
$7.50 |
| 1331 |
Discharge Nozzle 31 |
$7.50 |
| 1335 |
Discharge Nozzle 35 |
$7.50 |
| 1337 |
Discharge Nozzle 37 |
$7.50 |
| 1340 |
Discharge Nozzle 40 |
$7.50 |
| 1342 |
Discharge Nozzle 42 |
$7.50 |
| 1345 |
Discharge Nozzle 45 |
$7.50 |
| 1360 |
30cc Pump Arm |
$7.50 |
| 1370 |
Brass Float |
$10.00 |
| 1375 |
Solid Float |
$20.00 |
| 1380 |
Solid Notched Float |
$29.95 |
| 1390 |
Primary Float Bowl Center Pivot |
$35.00 |
| 1395 |
Secondary Float Bowl |
$35.00 |
| 1400 |
Secondary Idle Adjust Cam Holder |
$20.00 |
| 1410 |
Secondary Idle Over Run |
$32.50 |
| 1420 |
Idle Adjustment Screw |
$7.95 |
| 1450 |
Small Jet Board |
$18.00 |
| 1460 |
Large Jet Board |
$30.00 |
| 1500 |
Two Barrel Hardware Kit |
$16.00 |
| 1510 |
Four Barrel Hardware Kit |
$25.00 |
| 1540 |
10x32 Brass Air Bleed Blank |
$2.50 |
| 1550 |
Stainless Steel Butterfly 1 11/16 |
$4.00 |
| 1550 |
Steel Butterfly 1 11/16 |
$2.50 |
| 1560 |
Stainless Steel Butterfly 1 ¾ |
$4.00 |
| 1565 |
Steel Butterfly 1 ¾ |
$2.50 |
| 1606 |
-6 Fuel Line Kit Push Lock |
$67.50 |
| 1608 |
-8 Fuel Line Kit Push Lock |
$77.50 |
| 1616 |
-6 Fuel Line Kit Steel Braid w/ 1/8 port |
$81.25 |
| 1618 |
-8 Fuel Line Kit Steel Braid w/ 1/8 port |
$97.50 |
| 1626 |
-6 Fuel Fitting |
$6.75 |
| 1628 |
-8 Fuel Fitting |
$7.00 |
| 1700 |
Alcohol Billet Metering Block |
$125.00 |
| 1710 |
Gas Billet Metering Block |
$125.00 |
| H.E.I. Distributor Parts |
| 2000 |
H.E.I. Race Distributor Complete w/Coil |
$325.00 |
| 2001 |
H.E.I. Race Dist. w/MSD module & Coil |
$459.00 |
| 2002 |
Bronze Gear |
$50.00 |
| 2005 |
Curve Kit |
$15.00 |
| 2010 |
Lockout Plate |
$15.00 |
| 2020 |
Vacuum Lockout |
$15.00 |
| 2030 |
Module |
$45.00 |
| 2040 |
Cap & Rotor Set |
$34.50 |
| 2100 |
Spark Plug Wire Set Under Headers |
$135.00 |
| 2120 |
Spark Plug Wire Set Over Headers |
$135.00 |
| 2130 |
Spark Plug Wire Set Over/Under Headers |
$135.00 |
| 2200 |
MSD Plug Wire Set Under Headers |
$135.00 |
| 2220 |
MSD Plug Wire Set Over Headers |
$135.00 |
| 2230 |
MSD Plug Wire Set Over/Under Headers |
$135.00 |
| Misc. Parts |
| 3500 |
Race Pump Small Block Chevy |
$299.95 |
| 3511 |
Fuel Pressure Regulator |
$129.95 |
| 4000 |
Carburetor Storage Box |
$42.50 |
| 4010 |
Air Cleaner Shield |
$19.95 |
| 4100 |
Computech E.G.T. Single |
$289.95 |
| 4102 |
Computech E.G.T. Double |
$349.95 |
| Longacre Products |
| 32700 |
Standard Carb. Linkage Kit 23 ¼ |
$31.95 |
| 32702 |
Standard Carb. Linkage Kit 28 ½ |
$34.95 |
| 32707 |
Carburetor Bushing |
$5.95 |
| 32730 |
Throttle Stop 4150 Four Barrel |
$32.50 |
| 32732 |
2300 Two Barrel |
$34.95 |
| 50886 |
Spark Plug Inspection Light |
$39.95 |
| 50888 |
Air Density Gauge |
$119.75 |
| Phenolic Adapter/Spacers |
| 5040 |
Holley Two Barrel Carb. Spacer 1 |
$40.00 |
| 5050 |
Holley Two Barrel to GM Two Barrel |
$50.00 |
| 5060 |
Holley Two Barrel to Square Flange |
$65.00 |
| 5070 |
Holley Two Barrel to Q-Jet |
$65.00 |
| 5150 |
Four Barrel 1 Spacer |
$47.50 |
| 5152 |
Four Barrel ½ Spacer |
$28.75 |
| 5210 |
Dominator 1 Spacer |
$47.50 |
| 5212 |
Dominator ½ Spacer |
$28.75 |
| 5250 |
Quadrajet 1 Spacer |
$47.50 |
| 5252 |
Quadrajet ½ Spacer |
$28.75 |
| 5510 |
Carb. Stud Kit 2 |
$6.75 |
| 5520 |
Carb. Stud Kit 2 ½ |
$8.95 |
| Quarter Midget Pricing |
|
| Honda 120 Phase I Carburetor |
$120.00 |
| Honda 120 Phase II Carburetor |
150.00 |
| Honda 160 Phase I Carburetor |
125.00 |
| Honda 160 Phase II Carburetor |
155.00 |
| Engine Storage Box |
70.00 |
| Air Filter |
35.00 |
| K&N Oil |
8.00 |
| Air Filter Adapter |
25.00 |
| |
|
| Yamaha 1200/1250 Carburetor Rebuilding |
|
| 7002 Phase II |
$ 295.00 |
| 7010 Air Cleaner (2 Required) |
35.00 |
| 7020 Main Jet |
4.00 |
| 7030 Pilot Jet |
4.00 |
| 7040 Air Corrector |
4.00 |
All prices subject to change through rising freight charges. Please contact us to ensure current pricing.
1000 Non-Stick Bowl Gasket Set $12.00
Finally a gasket set that really does not stick. The set includes:
One each bowl & metering gasket
Four bowl screw nylon washer.

1450 Small Jet Board $18.00
A pocket size board, which stores 8 pairs of jets, 2 power valves, and 2 discharge nozzles.(jets, power valves, nozzles sold separately)

1460 Large Jet Board $30.00
This jet board is for the racer with a lot of jets. The board stores 44 pair of jets, 6 power valves, and 4 discharge nozzles. ( jets, nozzles, power valves sold separately)

2000 H.E.I. Race Distributor Complete $325.00
This new unit is custom built for the application. An advance curve can be installed or locked up.
2100-2230 Spark Plug Wire Set $135.00
This wire set is offered in several configurations.
These sets are numbered and custom built for your application. A protected heat shield is also installed on each wire.

4000 Carburetor Storage Box $42.50
Keeping your expensive carburetor safe is a great idea. The carb. Is fastened to the base with four bolts. The top cover slips over the base and is also bolted down. This protects the carburetor from spills. (Carburetor sold separately)

4010 Air Cleaner Shield $19.95
Keeping the fast moving hot air from traveling over the carburetor is very important. The shield installs to the bottom of your current 14-inch air cleaner. The mounting hardware is included. Air cleaner assembly and element sold separately.
50888 Air Density Gauge w/case $119.75

32707 Carburetor Bushing $5.95

4100 E.G.T. Plus Single $289.95
4102 E.G.T. Double $349.95

2010 H.E.I. Lock-up Plate $15.00
This plate will lock-up your distributor advance. The part works well in a crate motor or low compression engines. Installation is quick and easy.

1420 Idle Adjustment Screw $7.95
Adjusting the idle speed without removing the air cleaner or a screwdriver. Works great when warming up a cold engine.

3511 Race Pump Regulator $129.95

3500 Race Pump Small Block Chevy $299.95

50886 Spark Plug Inspection Light $39.95

Standard Carb Linkage Kit
32700 - 23 ¼ $31.95
32702 - 28 ½ $34.95

32730 - Throttle Stop Bracket
Two Barrel $34.95
Four Barrel $32.50

All prices subject to change through rising freight charges. Please contact us to ensure current pricing.